Detailed demo page
Your current location is:HOME >> Detailed demo page
PRODUCT >> CrossFlowFan Balancing Machine >> YFW-5000A CrossFlowFan?Balancing?Machine
YFW-5000A CrossFlowFan?Balancing?Machine 

※?????Industrial control computer 19 "LCD color screens
※?????WidowsChinese and English system double choice
※?????With GB-2000 general microcomputer balance measuring system
※?????Automatic program-controlled amplifier module
※?????Any workpiece scaling function, arbitrary Angle clamp compensating and workpiece information storage
※?????Qualified quantity showed that adjustment function measurement cycle
※?????Signal amplifier amplification and manual adjustment, signal self-check, automatic diagnosis
※?????Vector graphics, waveform and out of balance, shows at the same time
※?????Surplus balabcing g and unbalanced torque, the g cm, g mm can choose to display
※?????Optional function
1、?????????Balance Angle automatic tracking function
2、?????????Parking automatic positioning function
3、?????????Vector Angle function decomposition
Characteristics: this series is designed for fan blower, industry, and other large diameter workpieces production requirements of the hard supporting horizontal special dynamic balance machine, with roller bearing, universal couplings drive, frequency conversion motor speed and frequency converter, the industrial control computer for data processing, color screen real-time display don’t balance phase Angle and value, real-time speed, lathe bed all use whole casting, the stability is good. Widely used fan, blower, etc, can be in the single side, double side and multiple correction plane balance measurement. Have high efficiency, precision accurate, show intuitional, reliable quality, easy maintenance, the characteristics of software with ordinary workpiece and standard rotor two calibration function, overcoming the other hard supporting balance machine measurement system to users to calibration equipment defects, and the coupling compensation function and so on many kinds of measuring method and function to choose, can realize the input parameters, preview, the experiment, the results storage, print, operating all adopt the localization menu structure, the man-machine dialogue, automatic hints.

Technology parameters

Mass scope of workpiece kg
Max length of workpiece mm
Two span of supports mm
Trunnion support mm
Balancing speed r/min
Min achievable residual unbalance amount
Unbalance reduction ratio %
Motor power
mode of speed regulation
Frequency control + four POTS mechanical variable speed
Transmission model
Universal joint

Click:1807  Entry time:2013-2-27 【Print this page】 【Return
Thanks for your message There were 0 messages.

Full name: Selection of Avatar
Sex: Sir  Ma'am
Contact telephone number: (Must be 11 digits of the telephone or mobile phone can be)
Your message:
Verification code: 9921 (Must fill in)
Phone:0531-88633278    Fax:0531-88633298     Tel:13869186546     Company Address: Liu Yin District, Jinan ashamed seven village